Product Description
Model | MDS1857P | |||||||||
Compressor | Air delivery |
m3/min | 5.2 | |||||||
cu.ft/min | 185 | |||||||||
Discharge pressure | bar | 7 | ||||||||
psig | 101 | |||||||||
Oil gas tank | L | 90 | ||||||||
Diesel Engine |
Manufacture&Model | 404D-22 | ||||||||
Cylinder Number | 4 | |||||||||
Displacement(L) | 2.216 | |||||||||
Rotation speed(Rmp) | Operating | 2500 | ||||||||
Idle speed(r/min) | 1800 | |||||||||
Rated power(KW) | 42 | |||||||||
Lubricating Oil capacity(L) | 23 | |||||||||
Coolant Capacity(L) | 7 | |||||||||
Voltage of Battery | 12 | |||||||||
Others | Dimension | L(mm) | 3239 | |||||||
H(mm) | 1740 | |||||||||
Weight(kg) | 1280 |
Standard Configuration |
. Suction valve Lubricating oil filter Oil thermostatic valve 55°C radiator
Solenoid valve Vertical air/oil tank Pressure regular valve Air/oil separator
Lubricating oil radiator Safety valve Emergency stop button Air filter of engine
Minimum pressure valve Lockable battery isolator switch
Air filter of compressor Vent valve Powder coated canopy Shuttle valve
24V sealed for life maintenance free battery Fuel tank for 8 hours running
Structure diagram |
Feature&Benefit | ||||||||||
Feature | Benefit | |||||||||
Pressure selection and control | Easy pressure setting | |||||||||
Flow selection and control | The working pressure and airflow rate can be adjusted according to the size of air consumption without wasting any diesel | |||||||||
The twin-screw rotor is directly connected with the diesel engine by a highly flexible coupling | Outputting more air with less energy consumption, featuring high reliability, longer service life, and low maintenance cost. | |||||||||
The two-stage air filtration system | The total efficiency of air filtration reaches 99.8% ensuring the compressor to not be infringed by dust and dirt particles and longer service life of the engine | |||||||||
High-temperature resistance design | Able to run for a long time under extreme cold or hot temperature from -20ºC to 50ºC | |||||||||
One-button start, clear operational parameters | Operators don’t have to go through long-term professional training, and unattended operations can be achieved. |
Application areas |
Application | Nominal Working Pressure(bar) | Free Air Delivery Range(m3/min) | ||||||||
General Construction (building sites, road maintenance, bridges, tunnels, concrete pumping and shotcreting) |
Hand-held pneumatic breakers | 7~14 | 5~13 | |||||||
Jack hammers | ||||||||||
Air guns | ||||||||||
Shotcrete equipment | ||||||||||
Pneumatic wrenches | ||||||||||
Nut runners | ||||||||||
Ground Engineering Drilling (basement and foundation excavation for apartment blocks and other buildings) |
Pneumatic rock drills | 7~17 | 12~28 | |||||||
Block cutters | ||||||||||
Dewatering pumps. | ||||||||||
Hand-held pneumatic breakers | ||||||||||
Utility, CHINAMFG Blasting (shipyards, steel construction and large renovation jobs) |
Sandblasting (remove rust, scale, paint) |
7~10 | 10~22 | |||||||
Blast Hole Drilling (aggregate production for construction stabilization, cement production in limestone quarries and open pit mining) |
Rock drills | 14~21 | 12~29 | |||||||
Dewatering pumps | ||||||||||
Hand-held breakers | ||||||||||
High Pressure Drilling (drilling for water wells and foundations for high-rise buildings, along with geotechnical/geothermal applications) |
Water well drilling | 20~35 | 18~40 | |||||||
DTH drilling | ||||||||||
Rotary drilling |
Selection table |
Small Series | ||||||||||
Small Series | FAD | Pressure | Engine model | Dimensional Date(mm) | ||||||
m3/min | cfm | Bar | psig | length | width | height | weight(kg) | |||
model | with tow bar | without tow bar | ||||||||
MDS55S-7 | 1.55 | 55 | 7 | 101.5 | D902 | 2925 | 1650 | 1200 | 1200 | 600 |
MDS80S-7 | 2.24 | 80 | 7 | 101.5 | D1005 | 2925 | 1650 | 1200 | 1200 | 630 |
MDS100S-7 | 2.8 | 100 | 7 | 101.5 | V1505 | 2925 | 1650 | 1200 | 1200 | 640 |
MDS125S-7 | 3.5 | 125 | 7 | 101.5 | V1505 | 3065 | 1800 | 1500 | 1350 | 810 |
MDS130S-8 | 3.7 | 132 | 8 | 116 | JE493 | 3065 | 1800 | 1500 | 1350 | 810 |
MDS185S-7 | 5.18 | 185 | 7 | 101.5 | JE493 | 3200 | 1900 | 1740 | 1660 | 950 |
MDS185S-10 | 5.18 | 185 | 10 | 145 | JE493 | 3050 | 1900 | 1740 | 1660 | 950 |
Middle Series (Low&Medium pressure) | ||||||||||
Middle Series (Low&Medium pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | ||||||
m3/min | cfm | Bar | psig | length | width | height | weight(kg) | |||
model | with tow bar | without tow bar | ||||||||
MDS265S-7 | 7.42 | 265 | 7 | 101.5 | JE493 | 3629 | 2200 | 1700 | 1470 | 1200 |
MDS300S-14 | 8.4 | 300 | 14 | 203 | 4BTA3.9 | 3850 | 2600 | 1810 | 2378 | 1800 |
MDS350S-10 | 9.9 | 354 | 10 | 145 | 4BT3.9 | 3850 | 2600 | 1810 | 2378 | 1800 |
MDS390S-7 | 11 | 393 | 7 | 101.5 | 4BTA3.9 | 3850 | 2600 | 1810 | 2378 | 1800 |
MDS390S-13 | 11 | 393 | 13 | 188.5 | QSB4.5 | 3850 | 3100 | 1810 | 2378 | 1980 |
MDS429S-7 | 12 | 429 | 7 | 101.5 | 4BTA3.9 | 3850 | 2600 | 1810 | 2378 | 1800 |
MDS429S-14 | 12 | 429 | 14 | 203 | QSB4.5 | 3850 | 3100 | 1810 | 2378 | 1980 |
MDS500S-14 | 14.1 | 504 | 14 | 203 | 6BTAA5.9 | 4550 | 3600 | 1810 | 2378 | 3100 |
MDS690S-14 | 19.3 | 689 | 14 | 203 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 |
MDS720S-10 | 20.2 | 721 | 10 | 145 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 |
MDS750S-12 | 21 | 750 | 12 | 174 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 |
MDS786S-10.3 | 22 | 786 | 10.3 | 149.35 | QSB6.7 | 4950 | 3300 | 2170 | 2620 | 3500 |
MDS820S-14 | 23 | 821 | 14 | 203 | 6LTAA8.9 | 5300 | 4200 | 2170 | 2630 | 5200 |
MDS850S-8.6 | 24 | 857 | 8.6 | 124.7 | 6CTAA8.3 | 5300 | 4200 | 2170 | 2630 | 4600 |
MDS900S-7.1 | 25.3 | 904 | 7.1 | 102.95 | 6CTA8.3 | 5300 | 4200 | 2170 | 2630 | 4600 |
Middle Series (Medium&High pressure) | ||||||||||
Middle Series (Medium&High pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | ||||||
m3/min | cfm | Bar | psig | length | width | height | weight(kg) | |||
model | with tow bar | without tow bar | ||||||||
MDS460S-17 | 13 | 464 | 17 | 246.5 | 6BTAA5.9 | 4600 | 3500 | 1800 | 2230 | 3500 |
MDS620S-17 | 17.4 | 621 | 17 | 246.5 | 6LTAA8.9 | 5300 | 4200 | 2170 | 2630 | 5200 |
MDS650S-19 | 18.2 | 650 | 19 | 275.5 | QSL8.9 | 5300 | 4200 | 2170 | 2630 | 5200 |
MDS690S-20.4 | 19.4 | 693 | 20.4 | 295.8 | 6LTAA8.9 | 5300 | 4200 | 2170 | 2630 | 5200 |
MDS770S-21 | 21.6 | 771 | 21 | 304.5 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS830S-18 | 23.2 | 830 | 18 | 261 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS820S-25 | 23 | 821 | 25 | 362.5 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5600 |
MDS860S-20.4/17.3 | 24.2 | 864 | 20.4 | 295.8 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
24.2 | 864 | 17.3 | 250.85 | |||||||
MDS875S-23 | 24.5 | 875 | 23 | 333.5 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5600 |
Large Series (Low&Medium pressure) | ||||||||||
Large Series (Low&Medium pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | ||||||
m3/min | cfm | Bar | psig | length | width | height | weight(kg) | |||
model | with tow bar | without tow bar | ||||||||
MDS900S-14.2/10.5 | 25.1 | 896 | 14.2 | 205.9 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
25.2 | 900 | 10.5 | 152.25 | |||||||
MDS910S-14 | 25.6 | 914 | 14 | 203 | 6LTAA8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS970S-10 | 27.2 | 971 | 10 | 145 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS1011S-8.6 | 28.3 | 1011 | 8.6 | 124.7 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS1054S-12 | 29.5 | 1054 | 12 | 174 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS1250S-8.6 | 35 | 1250 | 8.6 | 124.7 | QSL8.9 | 5300 | 4200 | 2100 | 2630 | 5280 |
MDS1400S-13 | 40 | 1400 | 13 | 188.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 5800 |
MDS1600S-10.3 | 45 | 1600 | 10.3 | 149.35 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 5800 |
MDS1785S-13 | 50 | 1785 | 13 | 188.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 5800 |
MDS2140S-10 | 60 | 2142 | 10 | 145 | QSZ14 | 7400 | 5400 | 2230 | 2630 | 8400 |
Large Series (Medium&High pressure) | ||||||||||
Large Series (Medium&High pressure) | FAD | Pressure | Engine model | Dimensional Date(mm) | ||||||
m3/min | cfm | Bar | psig | length | width | height | weight(kg) | |||
model | with tow bar | without tow bar | ||||||||
MDS900S-20 | 25.3 | 904 | 20 | 290 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5800 |
MDS960S-18 | 26.9 | 961 | 18 | 261 | QSM11 | 5300 | 4200 | 2100 | 2630 | 5800 |
MDS1000S-35 | 28.2 | 1000 | 35 | 507.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1089S-25 | 30.5 | 1089 | 25 | 362.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1200S-24 | 33.6 | 1200 | 24 | 348 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1250S-21 | 35 | 1250 | 21 | 304.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1250S-25 | 35 | 1250 | 25 | 362.5 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1250S-30 | 35 | 1250 | 30 | 435 | WP17G770E302 | 6200 | 4700 | 2100 | 2630 | 7800 |
MDS1250S-35 | 35 | 1250 | 35 | 507.5 | WP17G770E302 | 6200 | 4700 | 2100 | 2630 | 7800 |
MDS1250S-40 | 35 | 1250 | 40 | 580 | WP17G770E302 | 6200 | 4700 | 2100 | 2630 | 7800 |
MDS1428S-18 | 40 | 1428 | 18 | 261 | QSZ13 | 6200 | 4700 | 2100 | 2630 | 7200 |
MDS1428S-35 | 40 | 1428 | 35 | 507.5 | TAD1643VE-B | 7400 | 5500 | 2180 | 2650 | 10000 |
MDS1428S-40 | 40 | 1428 | 40 | 580 | QSK19 | 7400 | 5500 | 2180 | 2650 | 10000 |
MDS1600S-25 | 44.8 | 1600 | 25 | 362.5 | WP17G770E302 | 7400 | 5500 | 2180 | 2650 | 10000 |
GTL Air compressor test system |
Shipping Cost:
Estimated freight per unit. |
To be negotiated |
---|
After-sales Service: | Online |
---|---|
Warranty: | One Year |
Lubrication Style: | Lubricated |
Customization: |
Available
|
|
---|
Can air compressors be used for painting and sandblasting?
Yes, air compressors can be used for both painting and sandblasting applications. Here’s a closer look at how air compressors are utilized for painting and sandblasting:
Painting:
Air compressors are commonly used in painting processes, especially in automotive, industrial, and construction applications. Here’s how they are involved:
- Spray Guns: Air compressors power spray guns used for applying paint coatings. The compressed air atomizes the paint, creating a fine mist that can be evenly sprayed onto surfaces. The pressure and volume of the compressed air impact the spray pattern, coverage, and overall finish quality.
- Paint Mixers and Agitators: Compressed air is often used to power mixers and agitators that ensure proper blending of paint components. These devices use the compressed air to stir or circulate the paint, preventing settling and maintaining a consistent mixture.
- Airbrushing: Air compressors are essential for airbrushing techniques, which require precise control over airflow and pressure. Airbrushes are commonly used in artistic applications, such as illustrations, murals, and fine detailing work.
Sandblasting:
Air compressors play a crucial role in sandblasting operations, which involve propelling abrasive materials at high velocity to clean, etch, or prepare surfaces. Here’s how air compressors are used in sandblasting:
- Blasting Cabinets: Air compressors power blasting cabinets or booths, which are enclosed spaces where the sandblasting process takes place. The compressed air propels the abrasive media, such as sand or grit, through a nozzle or gun, creating a forceful stream that impacts the surface being treated.
- Abrasive Blasting Pots: Air compressors supply air to abrasive blasting pots or tanks that store and pressurize the abrasive media. The compressed air from the compressor enters the pot, pressurizing it and allowing for a controlled release of the abrasive material during the sandblasting process.
- Air Dryers and Filters: In sandblasting applications, it is crucial to have clean, dry air to prevent moisture and contaminants from affecting the abrasive blasting process and the quality of the surface being treated. Air compressors may be equipped with air dryers and filters to remove moisture, oil, and impurities from the compressed air.
When using air compressors for painting or sandblasting, it is important to consider factors such as the compressor’s pressure and volume output, the specific requirements of the application, and the type of tools or equipment being used. Consult the manufacturer’s guidelines and recommendations to ensure the air compressor is suitable for the intended painting or sandblasting tasks.
Proper safety measures, such as wearing protective gear and following established protocols, should always be followed when working with air compressors for painting and sandblasting applications.
Are there differences between single-stage and two-stage air compressors?
Yes, there are differences between single-stage and two-stage air compressors. Here’s an in-depth explanation of their distinctions:
Compression Stages:
The primary difference between single-stage and two-stage air compressors lies in the number of compression stages they have. A single-stage compressor has only one compression stage, while a two-stage compressor has two sequential compression stages.
Compression Process:
In a single-stage compressor, the entire compression process occurs in a single cylinder. The air is drawn into the cylinder, compressed in a single stroke, and then discharged. On the other hand, a two-stage compressor utilizes two cylinders or chambers. In the first stage, air is compressed to an intermediate pressure in the first cylinder. Then, the partially compressed air is sent to the second cylinder where it undergoes further compression to reach the desired final pressure.
Pressure Output:
The number of compression stages directly affects the pressure output of the air compressor. Single-stage compressors typically provide lower maximum pressure levels compared to two-stage compressors. Single-stage compressors are suitable for applications that require moderate to low air pressure, while two-stage compressors are capable of delivering higher pressures, making them suitable for demanding applications that require greater air pressure.
Efficiency:
Two-stage compressors generally offer higher efficiency compared to single-stage compressors. The two-stage compression process allows for better heat dissipation between stages, reducing the chances of overheating and improving overall efficiency. Additionally, the two-stage design allows the compressor to achieve higher compression ratios while minimizing the work done by each stage, resulting in improved energy efficiency.
Intercooling:
Intercooling is a feature specific to two-stage compressors. Intercoolers are heat exchangers placed between the first and second compression stages. They cool down the partially compressed air before it enters the second stage, reducing the temperature and improving compression efficiency. The intercooling process helps to minimize heat buildup and reduces the potential for moisture condensation within the compressor system.
Applications:
The choice between a single-stage and two-stage compressor depends on the intended application. Single-stage compressors are commonly used for light-duty applications such as powering pneumatic tools, small-scale workshops, and DIY projects. Two-stage compressors are more suitable for heavy-duty applications that require higher pressures, such as industrial manufacturing, automotive service, and large-scale construction.
It is important to consider the specific requirements of the application, including required pressure levels, duty cycle, and anticipated air demand, when selecting between a single-stage and two-stage air compressor.
In summary, the main differences between single-stage and two-stage air compressors lie in the number of compression stages, pressure output, efficiency, intercooling capability, and application suitability.
What is the impact of tank size on air compressor performance?
The tank size of an air compressor plays a significant role in its performance and functionality. Here are the key impacts of tank size:
1. Air Storage Capacity: The primary function of the air compressor tank is to store compressed air. A larger tank size allows for greater air storage capacity. This means the compressor can build up a reserve of compressed air, which can be useful for applications that require intermittent or fluctuating air demand. Having a larger tank ensures a steady supply of compressed air during peak usage periods.
2. Run Time: The tank size affects the run time of the air compressor. A larger tank can provide longer continuous operation before the compressor motor needs to restart. This is because the compressed air in the tank can be used to meet the demand without the need for the compressor to run continuously. It reduces the frequency of motor cycling, which can improve energy efficiency and prolong the motor’s lifespan.
3. Pressure Stability: A larger tank helps maintain stable pressure during usage. When the compressor is running, it fills the tank until it reaches a specified pressure level, known as the cut-out pressure. As the air is consumed from the tank, the pressure drops to a certain level, known as the cut-in pressure, at which point the compressor restarts to refill the tank. A larger tank size results in a slower pressure drop during usage, ensuring more consistent and stable pressure for the connected tools or equipment.
4. Duty Cycle: The duty cycle refers to the amount of time an air compressor can operate within a given time period. A larger tank size can increase the duty cycle of the compressor. The compressor can run for longer periods before reaching its duty cycle limit, reducing the risk of overheating and improving overall performance.
5. Tool Compatibility: The tank size can also impact the compatibility with certain tools or equipment. Some tools, such as high-demand pneumatic tools or spray guns, require a continuous and adequate supply of compressed air. A larger tank size ensures that the compressor can meet the air demands of such tools without causing pressure drops or affecting performance.
It is important to note that while a larger tank size offers advantages in terms of air storage and performance, it also results in a larger and heavier compressor unit. Consider the intended application, available space, and portability requirements when selecting an air compressor with the appropriate tank size.
Ultimately, the optimal tank size for an air compressor depends on the specific needs of the user and the intended application. Assess the air requirements, duty cycle, and desired performance to determine the most suitable tank size for your air compressor.
editor by CX 2023-10-04